Since it takes hardly any BTU's to alter the temperature of the air people who have empty coolers, or very low mass product in the coolers will experience this fluctuation in temperature *at least APPARENTLY*
Our sensors are TOO low mass (and we use an algorithm that can make a passing air current seem like the real temperature in the room).
The first thing we need to do is put a thermometer in a glass of water and see if what they are struggling with is real.
IF we are still all over the place, try raising the FIN setting up to "4" or even higher.
Here on the steps on how to do that:
- Press the right arrow to move over to fin mode, press the check mark
- Use the right arrow to raise the number to 4
- Press the check mark to set it into memory
Raised the fins to 4 and still having trouble? Give us a call at 888.871.5723 and there are hidden settings that we can adjust.