Mitsubishi Mr Slim Unit
If you do manage to complete that step here is the rest of the set up:
Our friend Brandon was kind enough to share these excellent pictures of a Mitsubishi Mr Slim Unit
Here is a shot of the unit with the cover and air direction blades removed
There are 2 thermostats on the top right hand corner, one (secondary) clipped on in a silver clip and one (main) sitting in a copper cup. This copper cup has a copper lever that secures the thermostat inside the cup. Gently pull the lever up to free the thermostat.
Here are the two sensors pulled up and away from the unit
The room thermostat is a little tricky to find. It is located inside the dark grey electronic control panel. It is tucked in behind the square piece of grey plastic (to the right of thumb nail).
Here is the final set up. The CoolBot heater is foiled to the a/c room thermostat and tucked up away from the air flow. The 2 coil thermostats stand free.
**We have recently had an odd experience with a Mitsubishi in TX where an element inside the a/c had to be cut ****Find out details from Ron***